Description
The 12V MultiPlus-II 2x120V inverter/Charger is a reliable system good for setting up either a UPS system or something that needs a PowerAssist feature. The MultiPlus-II can easily pick up heavier loads when the AC inputs fail and ensure a quick transfer time (less than 20 milliseconds). With two AC inputs, the MultiPlus-II 2x120V can intake multiple AC powers, such as multiple generators and/or grid power. The MultiPlus-II 120V is good for any on-grid and off-grid installations.
The MultiPlus-II series can be monitored remotely through the VRM (Victron Remote Monitoring) This can be easily set up by pairing this inverter with a GX device. This system is good for off-grid or mobile installations that need constant monitoring.
Features:
- Built-in Transfer Switch: 50A dual-pole transfer switch from AC input to inverter
- Outputs: Two outputs – constant on and smart switched
- ESS Capable
- PowerAssist Feature
- Power Input: Accepts and passes through both lines of a 120/240V supply
- Charging and AC Load Capacity: Utilizes full 50A for charging and AC loads
- Built-in Transfer Switch: 50A dual-pole transfer switch from AC input to inverter
We recommend battery cable sizes 2/0 (short run) or 4/0 (long run). Use 5/16 end terminals.
Inverters sold by Current Connected are updated with the latest firmware (as of order date) and are custom-programmed for LiFePO4 (US customers only). For any additional config customization please let us know in your order notes.
Steve in Fla –
I have ordered both an SOK Battery (206AH) and a Multiplus II. Both times shipping was ridiculously fast! Sucker had a label on it and tracking mailed to me within 2 hours! Cannot stress enough the value added to an SOK or Victron purchase from these folks.
Robert Makowski –
bought a SOK Battery (206AH)w|Bluetooth and heater and it was shipped within a week. I had planned on purchasing a Victim Multi plus II but was told that I would need two or three batteries for it to work properly. I am very disappointed but glad Dexter explained why it wouldn’t work in my configuration.
The support is awesome. Thanks Dexter for taking time to explain things to a solar newbie.